Remove the system fan module.
6.
Remove the system fan module from the fan holder.
7.
To replace the component, reverse the removal procedure.
Hard drive cage fan and baffle
To remove the component:
Power down the server (on page 25).
1.
Remove the server from the rack, if necessary
2.
Remove the bezel
3.
Remove the access panel
4.
Disconnect the hard drive cage fan power cable from the system board.
5.
("Unlock the tower
bezel" on page 26).
("Access
panel" on page 26).
("Remove the server from the
Removal and replacement procedures 28
rack" on page 25).