Hot-Plug Sas And Sata Hard Drives - HP ProLiant ML310 Generation 4 Maintenance And Service Manual

Remove the hard drive fan cage and baffle.
6.
Remove the hard drive cage fan.
7.
To replace the component, reverse the removal procedure.

Hot-plug SAS and SATA hard drives

Hot-plug SATA and hot-plug SAS hard drives can be used interchangeably when a SAS controller is
installed. The embedded SATA controller supports only SATA drives.
CAUTION:
all bays are populated with either a component or a blank.
To remove the component:
Determine the status of the hard drive from the hot-plug hard drive LEDs.
1.
To prevent improper cooling and thermal damage, do not operate the server unless
Removal and replacement procedures 29