To replace the component:
Install the hard drive backplane. Press down on the connector to seat the board.
1.
Install the access panel
2.
Install the server blade.
3.
Front panel/hard drive cage assembly
To remove the component:
Power down the server blade (on page 22).
1.
Remove the server blade (on page 22).
2.
Remove the access panel
3.
Remove all hard drives
4.
Remove all hard drive blanks
5.
Remove the hard drive backplane
6.
("Access
panel" on page 23).
("Access
panel" on page 23).
("Hard
drive" on page 24).
("Hard drive
blank" on page 23).
("Hard drive
backplane" on page 26).
Removal and replacement procedures 27