HP ProLiant ML310 Generation 4 Maintenance And Service Manual page 48

CAUTION: To avoid damage to the processor:
Handle the processor only by the edges.
•
• Do not touch the bottom of the processor, especially the contact area.
Using your fingers, remove the processor from the failed system board.
13.
CAUTION: To avoid damage to the system board:
Do not touch the processor socket contacts.
•
Always install the processor socket cover after removing the processor from the socket.
•
• Do not tilt or slide the processor when lowering the processor into the socket.
Remove the failed system board.
14.
To replace the system board.
Install the spare system board in the server before installing the processor.
1.
Prepare the processor socket on the spare system board:
2.
Removal and replacement procedures 48