HP ProLiant ML310 Generation 4 Maintenance And Service Manual page 51

Apply all the grease to the top of the processor in one of the following patterns to ensure even
7.
distribution:
Install the heatsink.
8.
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
Install all components removed from the failed system board.
9.
IMPORTANT:
system board.
Install the access panel.
10.
Install the bezel.
11.
Install the server in the rack, if necessary.
12.
Power up the server.
13.
Install all components with the same configuration that was used on the failed
Removal and replacement procedures 51