Table of Contents
Advertisement
Remove the battery.
5.
IMPORTANT:
configuration. After replacing the battery, reconfigure the system through RBSU.
To replace the component, reverse the removal procedure.
Hard drive cage/bezel assembly
To remove the component:
WARNING:
internal system components to cool before touching them.
Power down the server blade (on page 23).
1.
Remove the server blade (on page 23).
2.
Remove the access panel
3.
Replacing the system board battery resets the system ROM to its default
To reduce the risk of personal injury from hot surfaces, allow the drives and the
("Access
panel" on page 24).
Removal and replacement procedures 27
Advertisement
Table of Contents
