HP BladeSystem c-Class Troubleshooting Manual page 72

Step Midplane assembly replacement action and verification
Action
Step 4
Perform PDU part number update using the following OA CLI command:
Where X represents 1, 2, 3, or 4 according to the power setup:
•
1 for single-phase power
•
2 for three-phase power, North America
•
3 for three-phase power, international
•
4 for DC power
Action
Step 5
Install all server blades and interconnect modules in the original locations.
set enclosure PDU_type X
Midplane assembly replacement 72