HP BladeSystem C-Class Interconnect Component Quickspecs

QuickSpecs
Overview
To connect your BladeSystem to outside networks and storage, HP offers a variety of options to support your familiar standards such
as Ethernet, Fibre Channel and InfiniBand. The built-in Virtual Connect architecture includes a 5 Terabit backplane, supports 4
redundant fabrics at once and includes 8, high-performance interconnect bays. All interconnect options are hot-pluggable and can
be installed in pairs for full redundancy.
HP 1:10Gb Ethernet BL-c Switch HP 1:10Gb Ethernet BL-c Switch HP 1:10Gb Ethernet BL-c Switch HP 1:10Gb Ethernet BL-c Switch
1. UID LED
2. Link Activity LEDs
3. Speed LEDs
4. Reset Button
5. RJ-45 1Gb Uplink Ports
6. 10Gb XFP Module Cages
7. 10Gb CX4 Uplink Port
8. DB-9 Serial Management Port
9. Health LED
1. Switch Module
2. UID LED
3. Health LED
Ethernet Switch Modules Ethernet Switch Modules Ethernet Switch Modules Ethernet Switch Modules
Cisco Catalyst Blade Switch 3120 Series Cisco Catalyst Blade Switch 3120 Series Cisco Catalyst Blade Switch 3120 Series Cisco Catalyst Blade Switch 3120 Series
DA - 12524 Worldwide — Version 11 — July 14, 2008
HP BladeSystem c-Class Interconnect Components HP BladeSystem c-Class Interconnect Components HP BladeSystem c-Class Interconnect Components HP BladeSystem c-Class Interconnect Components
Cisco Catalyst Blade for 3020 Cisco Catalyst Blade for 3020 Cisco Catalyst Blade for 3020 Cisco Catalyst Blade for 3020
1. Switch Module
2. Release latch
3. UID LED
4. SFP Module Port LED
5. SFP Module Ports for SX/LX Fiber
6. Gigabit Ethernet Port LEDs
7. Gigabit Ethernet RJ-45 Ports
8. Health LED
9. Mode Button
10. Switch LED Panel
8. Slot for Cisco Twin Gigabit Module or X2 Transceiver
module.
9. LEDs for ports 21 -22
10. Slot for Cisco Twin Gigabit Module or X2 Transceiver module
Page 1