Table of Contents
Advertisement
UM1521
1.4
Delivery recommendations
Some verifications are needed before using the board for the first time to make sure that
nothing was damaged during shipment and that no components are unplugged or lost.
When the board is extracted from its plastic bag, please check that no component remains
in the bag.
The main components to verify are:
1.
The 8 MHz crystal (X1) which may have been removed by a shock from its socket.
2.
The MicroSD Card which may have been ejected from the connector CN3 (left side of
the board).
3.
The dual-interface EEPROM board (ANT7-M24LR-A) which may have been unplugged
from the connector CN12 (top right corner of the board).
www.BDTIC.com/ST
Doc ID 022868 Rev 1
Overview
5/56
Advertisement
Table of Contents
Need help?
Do you have a question about the STM32L152D-EVAL and is the answer not in the manual?