Answering Calls; Ending Active Calls - Polycom SoundStation 6000 User Manual

User Guide for the SoundStation IP 6000 Phone

Answering Calls

Note

Ending Active Calls

Note
3 - 4
To answer a call:
>>
Press the Answer soft key.
The three LEDs flash green when the phone rings.
To ignore Incoming calls, press the Reject soft key (for private lines) or the
Silence soft key (for shared lines). To prevent your phone from ringing, enable the
Do Not Disturb feature (see
You can forward incoming calls by pressing the Forward soft key (see
Forwarding Calls Dynamically
If you set up your phone with a silent ring, press the Answer soft key to answer the
call.
To answer a call on a shared line:
1. Answer the incoming call.
2. Press the Hold soft key.
Anyone on another phone configured to use the same shared line can take the
call by selecting the call on their phone screen.
To end a call:
>>
Do one of the following
— Press
or
— Press the End Call soft key.
You cannot end a call that is on hold until you resume the call (that is, you must
press the Resume soft key before you press the End Call soft key).
Using Do Not Disturb
on page 3-13).
.
on page 3-14).