Polycom SoundStation 6000 User Manual page 48

User Guide for the SoundStation IP 6000 Phone
Placing Calls
Note
3 - 2
You can place a call off-hook (with a dial tone), or on-hook (without a dial
tone). If you place a call off-hook, you have the option of dialing a contact
using a URL, or using the last call return (LCR) feature (if enabled for your
phone). You can also place calls (on-hook and off-hook) using speed dial
numbers (see Placing Calls Using Speed Dials
The phone displays the duration of active calls on the phone screen. The
following figure shows an active call to Jane at directory number 1951 that has
lasted for one minute and ten seconds.
To place a call off-hook:
1. To obtain a dial tone, press
2. Do one of the following:
— Enter the desired number, and then press the Send soft key.
— To dial a URL, press the URL soft key, and then enter the URL of the
contact. Then, press the Send soft key.
To enter the number and letters displayed on a key, press the key one
or more times quickly. To enter "@", press the # key. To enter ".",
press the * key.
— To call the last person that called you (last call return), press the
LCR soft key, and then follow the voice prompts.
Last call return (LCR) is an optional feature that your system administrator sets up.
Your system may not support it. For more information, contact your system
administrator.
The active call displays on the screen showing the call duration and
destination.
To place a call on-hook:
>>
Enter the desired number, and then press the Dial soft key.
The active call displays on the screen showing the call duration and
destination.
on page 3-3).
or the New Call soft key.