Holding And Resuming Conferences - Polycom SoundStation 6000 User Manual

User Guide for the SoundStation IP 6000 Phone

Holding and Resuming Conferences

3 - 8
To set up a conference call with an active call and a call on hold:
>>
If you have an active call and a call on hold, press the Join soft key.
The Active:Conference screen displays.
A conference is created with the active call, the call on hold, and yourself.
When you place a conference call on hold, you place all other conference
participants on hold.
To place a conference call on hold:
>>
From the Active:Conference screen, press the Hold soft key.
The Hold:Conference screen displays. The other parties in the conference call
are put on hold.
From the Hold:Conference screen, you can do the following:
• To resume the conference call, press the Resume soft key. The
Active:Conference screen will display again.
• To place a call to a new party, press the New Call soft key. The conference
remains on hold, and the new call becomes the active call.
• To end the conference call and split the conference into two separate calls
on hold, press the Split soft key.