Selecting Gap Sensor
GAP SENSOR selects the type of media
used for printing. The options for this
selection are as follows:
TRANSMISSIVE (see–through)
REFLECTIVE (black stripe)
NONE (default)
Press ON LINE/PAUSE to place the
printer in the off line mode.
2
Press
3
Press
4
Press
5
Press
menu.
6
Press
7
Press
8
Press ENTER to select the setting.
9
Press ON LINE/PAUSE to place the
printer in the on line mode.
24
to enter the configuration menus.
to reach the printer control menu.
to enter the printer control menu.
to reach the gap sensor
to enter the gap sensor menu.
to view the desired setting.
OFFLINE
IGP/PGL
USER CONFIG
PAPER CONTROL
USER CONFIG
PRINTER CONTROL
PRINTER CONTROL
Media Handling
PRINTER CONTROL
Gap Sensor
Gap Sensor
None *
Gap Sensor
None *
Gap Sensor
Reflective
Gap Sensor
Transmissive
Gap Sensor
Reflective *
ONLINE
IGP/PGL
Operator' s Guide