Table of Contents
Advertisement
loading media
6
To load fan–folded media, proceed as
follows:
a Place the media supply either behind
or beneath the printer, as shown.
Make sure the media feeds freely
from the container.
b Route the media through the rear
media loading slot.
c Continue with step 7.
7
Route the media over the guide plate,
under the media sensor and over the
platen roller (located beneath the
printhead).
8
Rotate the media guide up, and slide it
to the edge of the media.
9
Continue feeding the media under the
printhead until the media exits the
printhead assembly.
Slide the media forward, until it extends
beyond the printer front slot. Ensure that
all media guides are adjusted to the
width of stock being used.
8
Media Hub
Assembly
Hinge
Media Edge
Plate
Sensor
Adjust
Media
Retainer
Media
Guide
Fanfold Media
Operator' s Guide
Advertisement
Table of Contents
