Table of Contents
Advertisement
cleaning the printer
4
Using a soft–bristled, non–metallic
brush, remove dust particles from the
media path, ribbon guides and ribbon
path.
5
Brush and vacuum accumulated dust or
residue, especially in the printhead
areas.
6
Using a cloth dampened with
anhydrous alcohol, clean the ribbon
guides, rollers and mechanical
assemblies.
7
The printhead will require cleaning after
extended normal operation. Regular
cleaning will ensure the highest print
quality. Clean the printhead using a
clean cotton swab and anhydrous
alcohol.
8
When the cutter or tear bar become dirty
with gummed media backing, clean the
area using a clean, lint–free cloth and
anhydrous alcohol.
9
Wipe the cabinet interior with a clean,
lint–free cloth damp (not wet) with water
and mild detergent, or spray the
surfaces lightly with window cleaning
solution.
1
Dry the interior with a dry, clean,
lint–free cloth.
11
Reload the media
(page
17).
30
(page
6) and ribbon
Cotton Swab
Printhead
Element
Printhead
Printhead
Latch
Hinge
Plate
Operator' s Guide
Advertisement
Table of Contents
