Using The Primary Operator Panel - Printronix T3204 series Operator's Manual

using the primary operator panel

Selections from the main menu will need to
be changed when changes in the print mode,
media size, options and various other
configuration items are required for the
printer. Instructions begin on
guide.
Refer to the "Configuring the Printer"
chapter in the
Setup Guide
instructions in how to access and use the
secondary operator panel.
The following pages describe the status
indicator lights and keys comprising the
primary operator panel, along with the
related operating modes.
Status Indicator Lights
The three status indicator lights (LEDs)
provide information about current printer
operation, as follows:
— Lit when the printer is
POWER
powered on.
ON LINE/PAUSE
on line or blinking when the printer is off
line or in a standby/fault state.
RIBBON MEDIA —
sensors fail to detect label media or the
presence of a ribbon.
Keys
Three primary operator panel keys provide
for the basic, day-to-day control of the
printer, as described on the following pages.
2
page 23
not
for complete
— Lit when the printer is
Lit when the printer
of this
ON LINE/
PAUSE
RIBBON
MEDIA
POWER
Operator' s Guide