Table of Contents
Advertisement
6
To remove roll–fed media, proceed as
follows:
a Roll the media onto the media hub or
onto the rewind hub, as appropriate.
b If you have rolled the media onto the
media hub, slide the roll of media off
the hub.
c If you have rolled the media onto the
rewind hub, lower the lower
right-hand front panel.
Unroll the media from the hub, and
remove the clasp
d Lift and snap the lower right-hand
front panel closed.
7
To remove fan–folded media, proceed
as follows:
a If the rewind hub was not being
used, simply pull the media through
the loading slot and out of the
printer.
Go on to
step
b If the rewind hub was being used,
finish rolling the media onto the
Operator' s Guide
8.
hub.
unloading media
3–Inch Core
Adaptors
Thumbscrews
Media
Supply Roll
Media Hub
Assembly
Rewind Hub
Media Hub
Assembly
Media
Retainer
15
Advertisement
Table of Contents
