Zte ZXR10 5900E Series User Manual page 20

ZXR10 5900E Series User Manual (IPv4 Volume)
St- Command
ep
4
show ip rip networks
ZXR10#
5 show ip route [<ip-address><net-mask>] rip
ZXR10#
6
show ip forwarding subnetrt <ip-address><n
ZXR10#
et-mask>
St- Command
ep
1 debug ip rip
ZXR10#
2
debug ip rip database
ZXR10#
12 Confidential and Proprietary Information of ZTE CORPORATION
ZXR10 5900E also provides debug command for RIP maintenance
and diagnosis.
This example shows a debug output example of the debug ip rip
command.
ZXR10#debug ip rip
RIP protocol debugging is on
ZXR10#
11:01:28: RIP: building update entries
130.1.0.0/16 via 0.0.0.0, metric 1, tag 0
130.1.1.0/24 via 0.0.0.0, metric 1, tag 0
177.0.0.0/9 via 0.0.0.0, metric 1, tag 0
193.1.168.0/24 via 0.0.0.0, metric 1, tag 0
197.1.0.0/16 via 0.0.0.0, metric 1, tag 0
199.2.0.0/16 via 0.0.0.0, metric 1, tag 0
202.119.8.0/24 via 0.0.0.0, metric 1, tag 0
11:01:28: RIP: sending v2 periodic update to 224.0.0.9 via
vlan10 (193.1.1.111)
130.1.0.0/16 via 0.0.0.0, metric 1, tag 0
130.1.1.0/24 via 0.0.0.0, metric 1, tag 0
177.0.0.0/9 via 0.0.0.0, metric 1, tag 0
193.1.1.0/24 via 0.0.0.0, metric 1, tag 0
11:01:28: RIP: sending v2 periodic update to 193.1.168.95
via vlan20 (193.1.168.111)
11:01:28: RIP: sending v2 periodic update to 193.1.168.86
via vlan20 (193.1.168.111)
11:01:28: RIP: sending v2 periodic update to 193.1.168.77
via vlan20 (193.1.168.111)
11:01:28: RIP: sending v2 periodic update to 193.1.168.68
via vlan20 (193.1.168.111)
Function
This displays all the RIP
interfaces configured by
users.
This displays global routing
table and if RIP is in the
routing table.
This displays driving hardware
routing table and if hardware
routing table is same as global
routing table.
Function
This traces the basic RIP
sending and receiving packet.
This traces the change
process of the RIP routing
table.