Ospf Configuration Example; Basic Ospf Configuration Example - Zte ZXR10 5900E Series User Manual

Command
ZXR10(config-router)#
<distance>][ext1 <distance>][ext2 <distance>]}
ment distance is 255, the routing information source is unreliable
and the related routes will be ignored.
distance ospf {[internal
OSPF Configuration
Example

Basic OSPF Configuration Example

Run OSPF on R1 and R2. Divide the network into three areas. This
is shown in Figure
F 6 BASIC OSPF CONFIGURATION
IGURE
R1 configuration:
ZXR10_R1(config)#router ospf 1
ZXR10_R1(config-router)#network 192.168.2.0 0.0.0.255 area 23
ZXR10_R1(config-router)#network 192.168.1.0 0.0.0.255 area 0
R2 configuration:
ZXR10_R2(config)#router ospf 1
ZXR10_R2(config-router)#network 192.168.3.0 0.0.0.255 area 24
ZXR10_R2(config-router)#network 192.168.1.0 0.0.0.255 area 0
The result is viewed as follows:
ZXR10_R1(config)#show ip ospf neighbor
OSPF Router with ID (10.1.2.1) (Process ID 1)
Neighbor ID Pri State
10.1.1.2 1 FULL/DR
ZXR10_R2(config)#show ip ospf neighbor
OSPF Router with ID (10.1.1.2) (Process ID 1)
Neighbor ID Pri State
10.1.2.1 1 FULL/BDR
Confidential and Proprietary Information of ZTE CORPORATION
Function
This defines the OSPF route
management distance based on
the route type.
6.
DeadTime
00:00:36
DeadTime
00:00:30
Chapter 3 OSPF Configuration
Address Interface
192.168.1.2 vlan8
Address Interface
192.168.1.1 vlan8
23