Zte ZXR10 5900E Series User Manual page 89

Command
show ip rpf <source-address>
ZXR10(config)#
Command
show ip pimsm mroute [group
ZXR10(config)#
<group-address>][source <source-address>][summary]
Viewing IGMP
Information
Commands
Command
show ip igmp interface[<interface-name>]
ZXR10#
This shows the multicast forwarding entries.
ZXR10#show ip mforwarding group-address 229.3.3.16
IP Forwarding Multicast Routing Table
Flags: N -No Used,U -Up Send,L -Limit upSend,A - Assert send
(*, 229.3.3.16), Flags:, HitFlag:0, Incoming interface: Null,
LastSrcIp: 0.0.0.0
Outgoing vlan interface list: NULL
L2bitmap:0x0000000000000000 L3bitmap:0x0000000000000000
(100.1.1.100, 229.3.3.16), Flags:, HitFlag:0,
Incoming interface: vlan4 19/3, LastSrcIp: 0.0.0.0
Outgoing vlan interface list: NULL
L2bitmap:0x4000000000000008 L3bitmap:0x0000000000000000
3. To show the multicast reverse path forwarding message, use
the following command.
4. To view the PIM-SM multicast routing table, use the following
command.
1. To view the IGMP configuration on the interface, use the fol-
lowing command.
This shows the IGMP configuration information of the Vlan4
interface.
ZXR10#show ip igmp interface vlan4
vlan4
Internet address is 4.4.4.4, subnet mask is 255.255.255.0
IGMP is enabled on interface
Current IGMP version is 2
IGMP query interval is 125 seconds
IGMP last member query interval is 1 seconds
IGMP query max response time is 10 seconds
IGMP querier timeout period is 251 seconds
IGMP querier is 4.4.4.4, never expire
Inbound IGMP access group is not set
IGMP immediate leave control is not set
2. To view the joining information of the IGMP group on the in-
terface, use the following command.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 6 Multicast Routing Configuration
Function
This shows the multicast reverse
path forwarding message.
Function
This views the PIM-SM multicast
routing table.
Function
This views the IGMP
configuration on the interface.
81