Zte ZXR10 5900E Series User Manual page 92

ZXR10 5900E Series User Manual (IPv4 Volume)
St- Command
ep
1
show ip pimdm interface [<interface-name>]
ZXR10#
2 show ip pimdm neighbor [<interface-name>]
ZXR10#
3 show ip pimdm mroute [[ group
ZXR10#
<group-address>[ source <source-address>]]|[
summary ]]
Parameter
group <group-address>
source <source-address>
summary
Viewing MSDP
Commands
Command
show ip msdp count
ZXR10#
Command
show ip msdp peer [<peer-address>]
ZXR10#
Command
show ip msdp sa-cache [<group-address>[<so
ZXR10#
urce-address>]]
84 Confidential and Proprietary Information of ZTE CORPORATION
Description
multicast group address, in dotted decimal mode
source addressin dotted decimal mode
brief
1. To view SA message statistics, use the following command.
2. To view MSDP neighbor detailed information, use the following
command.
This shows MSDP neighbor detailed information.
ZXR10(config)#show ip msdp peer
MSDP Peer 11.1.1.1
Description:
Connection status:
State: Down, Resets: 0, Connection source: vlan4 (4.4.4.4)
Uptime(Downtime): 00:00:04, Messages sent/received: 0/0
Connection and counters cleared 00:00:04 ago
SA Filtering:
Input (S,G) filter: none
Output (S,G) filter: none
Peer ttl threshold: 0
SAs learned from this peer: 0
3. To view S and G status from each MSDP neighbor, use the
following command.
Function
This views configured PIM-DM
interface status.
This views PIM-DM interface
status.
This views PIM-DM multicast
routing table content.
Function
This views SA message
statistics.
Function
This views MSDP neighbor
detailed information.
Function
This views S and G status from
each MSDP neighbor.