Bgp Maintenance And Diagnosis - Zte ZXR10 5900E Series User Manual

St-
Command
ep
1
show ip bgp protocol
ZXR10(config)#
2 show ip bgp neighbor [in|out]<ip-a
ZXR10(config)#
ddress>
3
show ip bgp[network <ip-address>[m
ZXR10(config)#
ask <net-mask>]]
4 show ip bgp summary
ZXR10(config)#
5
show ip route [<ip-address><net-mas
ZXR10(config)#
k>] bgp
6 show ip forwarding subnetrt
ZXR10(config)#
<ip-address><net-mask>
7
debug ip bgp in
ZXR10#
8 debug ip bgp out
ZXR10#
9 debug ip bgp events
ZXR10#
Example
BGP Maintenance and
Diagnosis
This example is to trace the state transition of the BGP with the
debug ip bgp events command.
ZXR10#debug ip bgp events
BGP events debugging is on
ZXR10#
04:10:07: BGP: 192.168.1.2 reset due to Erroneous BGP
Open received
04:10:07: BGP: 192.168.1.2 went from Connect to Idle
04:10:08: BGP: 192.168.1.2 went from Idle to Connect
04:10:13: BGP: 192.168.1.2 went from Connect to OpenSent
04:10:13: BGP: 192.168.1.2 went from OpenSent to OpenConfirm
04:10:13: BGP: 192.168.1.2 went from OpenConfirm to
Established
ZXR10#
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 BGP Configuration
Function
This displays the configuration
information of the BGP
module.
This displays the BGP
adjacency and the current
neighbor state.
This displays the BGP routing
table entries.
This displays the connection
state of all BGP neighbors.
This displays routing table
and checks if BGP in the route
table.
This displays hardware driving
routing table.
This traces and show the
notification packet sent by
the BGP.
This tracks and display the
notification packet sent by
the BGP.
This traces and display the
transition of state machine
connected to the BGP.
63