Zte ZXR10 5900E Series User Manual page 90

ZXR10 5900E Series User Manual (IPv4 Volume)
Command
show ip igmp groups[<interface-name>]
ZXR10#
Viewing PIM-SM
Information
Commands
Command
show ip pim bsr
ZXR10#
Command
show ip pim rp mapping
ZXR10#
Command
show ip pim rp hash <group-address>
ZXR10#
82 Confidential and Proprietary Information of ZTE CORPORATION
This shows the group member information on the Vlan1 inter-
face.
ZXR10#show ip igmp groups
IGMP Connected Group Membership
Group addr Interface
224.1.1.1 vlan4
1. To view the BootStrap Router (BSR) information, use the fol-
lowing command.
This shows BSR information.
ZXR10#show ip pim bsr
BSR address: 6.6.6.6
Uptime: 00:00:11, BSR Priority :0, Hash mask length:30
Expires:00:00:49
This system is a candidate BSR
candidate BSR address: 6.6.6.6,priority: 0,hash mask length: 30
This System is Candidate_RP:
candidate RP address: 6.6.6.6(vlan6),priority:192
2. To view the RP set information advertised by the BSP, use the
following command.
This shows the RP set information advertised by the BSR.
ZXR10#show ip pim rp mapping
Group(s) 224.0.0.0/4
RP 5.5.5.6 static, Priority :192
RP 6.6.6.6 , :v2, Priority :192
BSR: 6.6.6.6
Uptime: 00:00:14, expires: 00:02:16
3. To show the RP information selected by the given multicast
group, use the following command.
This shows the RP information selected by the group 224.1.1.1.
Function
This views the joining
information of the IGMP
group on the interface.
Present
00:00:48
Function
This views the BootStrap Router
(BSR) information.
Function
This views the RP set information
advertised by the BSP.
, via bootstrap
Function
This shows the RP information
selected by the given multicast
group.
Expire Last Reporter
never 4.4.4.4