Adhesive Spray; Spray Starch For Additional Stiffening - Bernette Chicago 7 Instruction Manual

Embroidery Setup

Adhesive Spray

Avoid using spray adhesive next to your embroidery system.
• At a distance of 25-30 cm use adhesive spray carefully.
• Spray the stabilizer and adhere to the wrong side of the
material carefully smoothing material so that there are
no puckers.
Application
Stretch and knitted material: to retain shape.
–
– Smooth material: to avoid slipping of material lay-
ers.
Appliqués can be exactly positioned.
–
– Material pieces: position material pieces on stabi-
lizer, e.g.pocket flaps.
Napped materials (i.e. velvet) that should not be
–
clamped in the hoop to avoid getting hoop marks.
To fix the parts to be embroidered.
–

Spray starch for additional stiffening

Spray starch is ideal for additional stiffening of fine, soft or
loosely woven materials.
• Spray the area to be embroidered
• Let dry; or press gently with a warm iron if necessary
• Always use an additional stabilizer such as water solu-
ble stabilizer on the wrong side of the material.
Application
Ideal for fine, loosely woven materials, e.g. batiste,
–
fine linen, etc.
96
502020.83.11_2013_06_bernette chicago 7_EN