Bernette Chicago 7 Instruction Manual page 48

Basic Sewing Procedures
Raise the presser foot and cut the thread.
•
To sew over same buttonhole, raise the presser foot (it
•
will return to original position).
After sewing the buttonhole, raise the buttonhole lever
•
until it stops.
N
ote
When having finishing and another stitch is selected (other
than the buttonhole, bartack or darning stitch) and the Start/
Stop button is pressed while the buttonhole lever is lowered,
the LCD will display the warning message which reminds
you to raise the buttonhole lever.
• Cut the slit of the buttonhole being careful not to cut
any stitches on either side.
• Use a pin as a stopper at the bartack so you do not cut
too much.
46
A-92
A-92
502020.83.11_2013_06_bernette chicago 7_EN
A-93
A-93