Display Explanation & Operating Functions
Function Buttons
Start/Stop button
•
Press the Start/Stop button to start the machine. Press
again to stop it. The machine will move slowly at the
start of sewing.
–
This way you may operate the machine without foot
control.
Reverse/Exit button
Reverse is pressed to sew in reverse.
The icon «Reverse» on the LCD indicates reverse sewing.
Only the Direct Group Patterns 1 – 5 and A Group Patterns
00 can be sewn in reverse.
If you press the Reverse/Exit button before starting to
•
sew
the machine will permanently sew in reverse. Press
–
the button again to sew forward.
•
If you press the reverse button during sewing
it will sew in reverse as long as the reverse buttons
–
is pressed.
In Embroidery Mode press this button to return to the type
selection display, the selected pattern is canceled.
Auto-Lock/Trace button
When the Direct Group Patterns 0 and A Group Patterns
13-26 are selected, the machine will immediately sew 3
securing stitches when the Auto-Lock button is pressed, then
it will stop automatically.
1
The LCD display shows the symbol until the machine is
stopped.
Except for Direct Group Pattern 0 and A Group Patterns
13-26, press the Auto-Lock button, the machine will sew 3
securing stitches at the end of the current pattern and then
stop automatically.
2
The LCD display shows the symbol until the machine is
stopped.
The function will be cancelled if you press the button once
again or select another pattern.
26
502020.83.11_2013_06_bernette chicago 7_EN
1
2