Basic Sewing Procedures
Button Sewing-on
Change the presser foot to the button sewing-on foot.
•
Move the feed dog control to lower the feed dog (b).
•
Position the work under the foot.
Place the button in the desired position, lower the foot.
•
•
Select zig-zag pattern.
Adjust the stitch width to «2.5-4.5» according to the
•
distance between the two holes of the button.
•
Turn the handwheel to check that the needle goes
cleanly into the left and right holes of the button.
•
Before sewing, press the Auto-lock button to sew
securing stitches automatically at the beginning and at
the end of the stitch.
If a shank is required, place a darning needle on top of
•
the button and sew.
•
For buttons with 4 holes, sew the front two holes first,
push the work forward and then sew the back two
holes.
N
ote
After having finished the work
42
502020.83.11_2013_06_bernette chicago 7_EN
a
a
b
a
b
a
a
b
b
b
a
b
a
b
a
a
a
b
b
b