Memory Editing functions - Change a stored stitch or its parameters
N
ote
Requirement: with existing patterns in Memory.
•
Press the memory button to enter the Memory Mode.
•
Use the arrow buttons to choose the desired Memory
file.
•
Press the OK button to enter the selected Memory file.
The cursor stays at the first position.
–
•
Use the arrow buttons to select the stitch that should
be replaced or have its parameters changed.
•
To change the stitch press the clr button and then
press the pattern group selection button to choose a
new stitch.
•
To change its parameters press the stitch length, stitch
width, mirror image, double needle or elongation but-
ton.
502020.83.11_2013_06_bernette chicago 7_EN
Special Functions
79