A-92
A-93
A-92
A-93
Buttonholes on stretch fabrics
When sewing buttonholes on stretch fabric, hook a heavy
thread or a cord under the buttonhole foot.
Attach the buttonhole foot and hook the cord at the
•
back of the presser foot.
•
Bring the two cord ends to the front of the foot and
insert them in the grooves, then temporarily tie them
there. Lower the presser foot and start sewing.
•
Set the stitch width to match the diameter of the cord.
Once the sewing is completed, pull the cord gently to
•
remove any loose parts, then trim off any excess.
N
ote
It is recommended to use stabilizer on the backside of the
fabric.
502020.83.11_2013_06_bernette chicago 7_EN
Basic Sewing Procedures
47