Maintenance
Cleaning the display
A
!
tteNtioN
Disconnect the power cord from the wall socket before
cleaning the display and the sewing machine surface,
otherwise injury or electrical shock may result.
If the front panel is dirty, wipe it gently with a soft, dry cloth.
Do not use any organic solvents or detergents.
Cleaning the sewing machine surface
If the surface of the sewing machine is dirty, lightly soak a
cloth in mild detergent, squeeze it out firmly and then wipe the
surface. After cleaning it once in this way, wipe the surface
again with a dry cloth.
A
!
tteNtioN
This machine is equipped with a 100mW LED lamp. If lamp
replacement is needed, please contact the nearest autho-
rized retailer.
Cleaning the hook
If lint and bits of thread accumulate in the hook, this will inter-
fere with the smooth operation of the machine. Check regu-
larly and clean the stitching mechanism when necessary.
A
!
tteNtioN
Disconnect the machine from the wall outlet before carrying
out any maintenance.
120
502020.83.11_2013_06_bernette chicago 7_EN