Bernette Chicago 7 Instruction Manual page 105

Raise the presser foot.
•
Cut the thread at the beginning of the stitching.
•
• Lower the presser foot.
Press the Start/Stop button to continue embroidering.
•
When the first colour is completed, the machine stops auto-
matically.
• The message «Raise presser foot» is displayed.
After raising, change the thread according to the information
on the display.
• Re-thread with the next colour and press the OK but-
ton to confirm.
Repeat the same actions.
•
When the embroidery is completed, the machine stops auto-
matically and this message appears.
• Press the OK button to return to the design selection
display.
N
ote
To simply threading of the new thread color and for easier
trim of the jumping stitches the embroidery hoop can be
moved forwards by pressing the Auto-Lock/Sequence
button. By pressing the Auto-Lock/Sequence button again,
the embroidery hoop goes back to the correct position.
502020.83.11_2013_06_bernette chicago 7_EN
Embroidery Selection
103