Bartack Stitch - Bernette Chicago 7 Instruction Manual

Basic Sewing Procedures

Bartack stitch

• Extend the button guide plate and set to the desire
bartack length.
Adjust the stitch width and stitch length to personalize
•
the stitches.
• Position the fabric so that the needle is 2mm (1/16
inch) in front of the pocket opening and then lower the
presser foot lever.
A Starting point
• Lead the upper thread down through the hole in the
presser foot.
Pull down the buttonhole lever and position it behind
•
the bracket on the buttonhole foot.
Gently hold the end of the upper thread in your left
•
hand and start sewing.
Sewing procedure for bartack is illustrated.
This is an example of sewn bartacks at pocket corners.
48
A-94
A-94
502020.83.11_2013_06_bernette chicago 7_EN
A-94
D D
A-94
A-94
D
D
0.4~1.0
D
0.4~1.0 1.0~3.0
0.4~1.0 1.0~3.0
0.4~1.0 1.0~3.0
0.4~1.0 1.0~3.0
1.0~3.0
A
A
A
A
A