Winding the Bobbin
3
Place the thread and spool holder onto the spool pin.
•
For smaller spools of thread use the small spool holder.
•
Snap the thread into the upper thread guide.
N
ote
If using special thread which winds quickly off the spool
attach a net to the spool before using and use the larger
spool holder. Reduce the thread tension if necessary.
•
Wind the thread clockwise around the bobbin winder
tension disc.
•
Insert the thread end through one of the inner holes in
the bobbin as illustrated and place the empty bobbin
on the spindle.
•
Push the bobbin to right.
2
4
502020.83.11_2013_06_bernette chicago 7_EN
1
Machine Setup
5 - 11
9