Bernette Chicago 7 Instruction Manual page 117

Warning message
Bobbin thread is low
This message is displayed when the bobbin thread is
running out.
BH lever is not lowered
This message is displayed when the buttonhole or
darning stitch was selected and the start/stop button
was pressed while the buttonhole lever is raised.
BH lever is not lifted
This message is displayed when the stitch other than the
buttonhole or darning stitch was selected and the start/
stop button was pressed while the buttonhole lever is
down.
Remove the embroidery hoop.
This message is displayed when the embroidery module
will initialize, it is reminding you to remove the embroidery
hoop.
Press the OK button to confirm
Warning display
502020.83.11_2013_06_bernette chicago 7_EN
Warnings
115