Needle Threader - Bernette Chicago 7 Instruction Manual

Machine Setup

Needle Threader

A !
tteNtioN
A !
tteNtioN
Raise the needle to its highest position and lower the
presser foot.
Turn power switch to the off position «O»!
• Lower the needle threader lever slowly and pull the
thread through the thread guide as illustrated and then
to the right.
• The needle threader automatically turns to the thread-
ing position and the hook pin passes through the
needle eye.
• Pull the thread to the right, guiding it to the front of the
needle
• Hold the thread loosely and release the lever slowly.
– The hook will turn and pass the thread through the
needle eye forming a loop.
– Pull the thread through the needle eye.
14
502020.83.11_2013_06_bernette chicago 7_EN