Warning Sound - Bernette Chicago 7 Instruction Manual

Warning sound

When operating correctly:
1 beep
When the memory is full with 20 units of designs:
•
– 3-short beeps
When operating incorrectly:
•
3-short beeps
–
• When the sewing machine is in trouble and can't sew:
3-short beeps
–
It means that the thread is twisted or jammed and the hand
wheel axle can't move. Please look through the «Trouble
shooting guide» to find the solution. After the problem has
been solved, the machine will continue sewing.
N
ote
If the problem is still not solved, please contact your local
dealer.
A !
tteNtioN
During sewing, if the thread get jammed inside the hook
stopping the needle from moving and you continue pressing
the foot control, the security switch will stop the machine
completely. In order to restart the sewing machine, you will
have to turn the on/off switch to the OFF position and then
ON again.
502020.83.11_2013_06_bernette chicago 7_EN
Warnings
119