All Rights Reserved - Bernette Chicago 7 Instruction Manual

My city/my bernette sublime
Hide thumbs Also See for Chicago 7:
Table of Contents

Advertisement

Safety Instruction
16. To disconnect, turn all controls to the off
(«O») position, then remove plug from out-
let.
17. Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
18. If the supply cord fixed with foot controller
is damaged, it must be replaced by the
manufacturer or its service agent or a
similar qualified person in order to avoid a
hazard.
19. Never place anything on the foot control.
20. This sewing machine is provided with
double insulation (except U.S.A/Canada).
Use only identical replacement parts. See
instructions for Servicing of double-insu-
lated products.
SAVE THESE INSTRUCTIONS!
A
!
tteNtioN
This sewing machine is intended for household use only. If
used intensively or commercially, regular cleaning and
especially attentive care is required.
Signs of wear and tear owing to intensive or commercial use
are not covered automatically, even if they occur within the
warranty period. The decision on how to deal with any such
cases rests with the local authorised servicing staff.

All rights reserved

For technical and product improvement reasons, the sewing computer's features, parts and accessory are subject to unan-
nounced changes and alterations at any time. The accessory included can differ from country to country.
4
SERVICING OF DOUBLE-
INSULATED PRODUCTS
In a double-insulated product, two systems of
insulation are provided instead of grounding.
No grounding means is provided on a double-
insulated product nor should a means for
grounding be added to the product. Servicing
a double-insulated product requires extreme
care and knowledge of the system and should
only be done by qualified service personnel.
Replacement parts for a double-insulated pro-
duct must be identical to those parts in the
product. A double insulated product is mar-
ked with the words «DOUBLE INSULATION»
or «DOUBLE INSULATED».
The symbol
product.
If the sewing machine is stored in a cold room, it should be
brought to a warm room about one hour before use.
502020.83.11_2013_06_bernette chicago 7_EN
may also be marked on the
N
ote

Advertisement

Table of Contents
loading

Table of Contents