Web Firmware Upgrade - Planet SGSW-24040 User Manual

Buttons
: Send a test mail to mail server to check this account is available or not.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

4.2.15 Web Firmware Upgrade

This page facilitates an update of the firmware controlling the switch. The Web Firmware Upgrade screen in
appears.
To open Firmware Upgrade screen perform the folling:
1. Click System -> Web Firmware Upgrade.
2. The Firmware Upgrade screen is displayed as in
3. Click the "
4. Select on the firmware then click "
5. Once the software be loaded to the system successfully. The following screen appears. The system will load the new
software after reboot.
Figure 4-2-18 Web Firmware Upgrade page screenshot
"button of the main page, the system would pop up the file selection menu to choose firmware.
", the Software Upload Progress would show the file upload status.
Figure 4-2-19 Software successfully loaded notice screen
User's Manual of SGSW-24040 / 24240 Series
Figure 4-2-18.
64
Figure 4-2-18