Planet SGSW-24040 User Manual page 435

[<dmac_type>] [(etype [<etype>] [<smac>] [<dmac>]) | (arp [<sip>] [<dip>] [<smac>] [<arp_opcode>] [<arp_flags>]) |
(ip [<sip>] [<dip>] [<protocol>] [<ip_flags>]) | (icmp [<sip>] [<dip>] [<icmp_type>] [<icmp_code>] [<ip_flags>]) | (udp
[<sip>] [<dip>] [<sport>] [<dport>] [<ip_flags>]) | (tcp [<sip>] [<dip>] [<sport>] [<dport>] [<ip_flags>] [<tcp_flags>])]
[permit|deny] [<rate_limiter>] [<port_copy>] [<logging>] [<shutdown>]
Parameters:
: ACE ID (1-128), default: Next available ID
<ace_id>
<ace_id_next> : Next ACE ID (1-128), default: Add ACE last
: Switch ACE keyword
switch
: Port ACE keyword
port
: Port number
<port>
: Policy ACE keyword
policy
: Policy number (1-8)
<policy>
: VLAN ID (1-4095) or 'any'
<vid>
: VLAN tag priority (0-7) or 'any'
<tag_prio>
: DMAC type: any|unicast|multicast|broadcast
<dmac_type>
: Ethernet Type keyword
etype
: Ethernet Type or 'any'
<etype>
: Source MAC address (xx-xx-xx-xx-xx-xx) or 'any'
<smac>
: Destination MAC address (xx-xx-xx-xx-xx-xx) or 'any'
<dmac>
: ARP keyword
arp
: Source IP address (a.b.c.d/n) or 'any'
<sip>
: Destination IP address (a.b.c.d/n) or 'any'
<dip>
<arp_opcode> : ARP operation code: any|arp|rarp|other
: ARP flags: request|smac|tmac|len|ip|ether [0|1|any]
<arp_flags>
: IP keyword
ip
: IP protocol number (0-255) or 'any'
<protocol>
: IP flags: ttl|options|fragment [0|1|any]
<ip_flags>
: ICMP keyword
icmp
: ICMP type number (0-255) or 'any'
<icmp_type>
: ICMP code number (0-255) or 'any'
<icmp_code>
: UDP keyword
udp
: Source UDP/TCP port range (0-65535) or 'any'
<sport>
: Destination UDP/TCP port range (0-65535) or 'any'
<dport>
: TCP keyword
tcp
: TCP flags: fin|syn|rst|psh|ack|urg [0|1|any]
<tcp_flags>
: Permit forwarding (default)
permit
: Deny forwarding
deny
<rate_limiter>: Rate limiter number (1-15) or 'disable'
: Port number for copy of frames or 'disable'
<port_copy>
User's Manual of SGSW-24040 / 24240 Series
414