Planet SGSW-24040 User Manual page 251

RADIUS Accounting Servers
The statistics map closely to those specified in RFC4670 - RADIUS Accounting Client MIB.
Use the server select box to switch between the backend servers to show details for.
Object
 Packet Counters
State -
Round-Trip radiusAuthClient
Time ExtRoundTripTim
e
Description
RADIUS accounting server packet counter. There are five receive and four transmit
counters.
Direction Name
Rx
Responses
Rx
Malformed
Responses
230
User's Manual of SGSW-24040 / 24240 Series
Shows the state of the server. It takes one of the
following values:
Disabled: The selected server is disabled.
Not Ready: The server is enabled, but IP
communication is not yet up and running.
Ready: The server is enabled, IP communication is
up and running, and the RADIUS module is ready to
accept access attempts.
Dead (X seconds left): Access attempts were made
to this server, but it did not reply within the configured
timeout. The server has temporarily been disabled,
but will get re-enabled when the dead-time expires.
The number of seconds left before this occurs is
displayed in parentheses. This state is only reachable
when more than one server is enabled.
The time interval (measured in milliseconds) between
the most recent Access-Reply/Access-Challenge and
the Access-Request that matched it from the RADIUS
authentication server. The granularity of this
measurement is 100 ms. A value of 0 ms indicates
that there hasn't been round-trip communication with
the server yet.
RFC4670 Name
radiusAccClientExt
Responses
radiusAccClientExt
MalformedRespons
es
Description
The number of RADIUS
packets (valid or invalid)
received from the server.
The number of malformed
RADIUS packets received
from the server. Malformed