Planet SGSW-24040 User Manual page 321

 PoE Temperature Unit 1
 PoE Temperature Unit 2

Local Port

PD Class

Power Used [W]

Current Used [mA]
 Priority
 Port Status
 AT / AF Mode
 Total
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
Display the current operating temperature of PoE chip unit 1.
The unit 1 is in charge of PoE Port-1~Port-12
Display the current operating temperature of PoE chip unit 2.
The unit 1 is in charge of PoE Port-13~Port-24
This is the logical port number for this row.
Display the class of the PD attached to the port, as established by the classification
process.
Class 0 is the default for PDs. The PD is classified based on power. The
classification of the PD is the maximum power that the PD will draw across all input
voltages and operational modes. A PD shall return Class 0 to 3 in accordance with
the maximum power draw as specified by
The Power Used shows how much power the PD currently is using.
The Power Used shows how much current the PD currently is using.
The Priority shows the port's priority configured by the user.
The Port Status shows the port's status.
Display the current PoE mode (SGSW-24040HP only).
Show the total watts usage of all PDs.
300
User's Manual of SGSW-24040 / 24240 Series
Table 4-16-1.