Stack Port State Ovewview; Stack Example - Planet SGSW-24040 User Manual


Master Forwarding Table
As the heading suggests, the information in the table is as seen from the master view.
For each switch in the stack, the following information is shown:
 The MAC address, switch ID, distance information, and the primary forwarding path to the switch.
 For ring topology, a backup path is also provided.
Figure 4-17-9 Stack Information page screenshot - Master Forwarding Table

4.17.4 Stack Port State Ovewview

This page provides an overview of the current switch port states. Clicking on the image of a port opens the Port Statistics
page.The port states are illustrated as follows:
SWITCH ID
MASTER LED

4.17.5 Stack Example

Stacking function is convenient for administrator to manage multiple switches by single IP. Basically, you got to have min. 2 units.
The SGSW Switch supports auto stack configuration. Once the stack cable is connect to the stack port of each SGSW switch
and power on them, the stack is builded automatically and the Switch ID is automatically assigned to the switch. It is also easy
to add or delete stackable switch to the stack without service interruption. The key point of the Stack management are:
Figure 4-17-10 Port State Overview page screenshot
313
User's Manual of SGSW-24040 / 24240 Series
Port Link status Stack Port Link status