Ipv6 Configuration - Planet SGSW-24040 User Manual

 VLAN ID
 DNS Server
 DNS Proxy
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and revert to previously saved values.

4.2.3 IPv6 Configuration

Configure the switch-managed IPv6 information on this page.
The Configured column is used to view or change the IPv6 configuration. The Current column is used to show the active IPv6
configuration. The screen in
The page includes the following fields:
Object
 Auto Configuration
 Address
Provide the managed VLAN ID. The allowed range is 1 through 4095.
Provide the IP address of the DNS Server in dotted decimal notation.
When DNS proxy is enabled, DUT will relay DNS requests to the current
configured DNS server on DUT, and reply as a DNS resolver to the client device
on the network.
Figure 4-2-3 appears.
Figure 4-2-3 IPv6 Configuration page screenshot
Description
Enable IPv6 auto-configuration by checking this box. If fails, the configured IPv6
address is zero. The router may delay responding to a router solicitation for a few
seconds, the total time needed to complete auto-configuration can be
significantly longer.
Provide the IPv6 address of this switch. IPv6 address is in 128-bit records
User's Manual of SGSW-24040 / 24240 Series
47