Planet SGSW-24040 User Manual page 247

RADIUS Accounting Servers
Object
 #
 IP Address
 State
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
but will get re-enabled when the dead-time expires. The number of seconds left
before this occurs is displayed in parentheses. This state is only reachable when
more than one server is enabled.
Description
The RADIUS server number. Click to navigate to detailed statistics for this server.
The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of
this server.
The current state of the server. This field takes one of the following values:
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and
running.
Ready: The server is enabled, IP communication is up and running, and the
RADIUS module is ready to accept accounting attempts.
Dead (X seconds left): Accounting attempts were made to this server, but it did
not reply within the configured timeout. The server has temporarily been
disabled, but will get re-enabled when the dead-time expires. The number of
seconds left before this occurs is displayed in parentheses. This state is only
reachable when more than one server is enabled.
226
User's Manual of SGSW-24040 / 24240 Series