Vlan Configuration - Planet SGSW-24040 User Manual

Object

Router Port
 Fast Leave
 Throttling
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
If an aggregation member port is selected as a router port, the whole aggregation will act as a router
port.

4.8.4 VLAN Configuration

Each page shows up to 999 entries from the VLAN table, default being 20, selected through the "entries per page" input field.
When first visited, the web page will show the first 20 entries from the beginning of the VLAN Table. The first displayed will be
the one with the lowest VLAN ID found in the VLAN Table.
The "VLAN" input fields allow the user to select the starting point in the VLAN Table. The IGMP Snooping VLAN Configuration
screen in Figure 4-8-7 appears.
Description
Specify which ports act as IGMP router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier.
The Switch forwards IGMP join or leave packets to an IGMP router port.

Auto:
Select "Auto" to have the Managed Switch automatically uses the port
as IGMP Router port if the port receives IGMP query packets.

Static:
The Managed Switch always uses the specified port as an IGMP
Router port. Use this mode when you connect an IGMP multicast
server or IP camera which applied with multicast protocol to the port.

None:
The Managed Switch will not use the specified port as an IGMP
Router port. The Managed Switch will not keep any record of an
IGMP router being connected to this port. Use this mode when you
connect other IGMP multicast servers directly on the non-querier
Managed Switch and don't want the multicast stream be flood to
uplink switch throught the port that connected to the IGMP querier.
Enable the Fast Leave on the port.
Enable to limit the number of multicast groups to which a switch port can belong.
153
User's Manual of SGSW-24040 / 24240 Series