Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.3.4 SNMP Trap Configuration
Configure SNMP trap on this page. The SNMP Trap Configuration screen in
The page includes the following fields:
Object
Trap Mode
Trap Version
Trap Community
to 126.
Figure 4-3-3 SNMP Trap Configuration page screenshot
Description
Indicates the SNMP trap mode operation. Possible modes are:
Enabled: Enable SNMP trap mode operation.
Disabled: Disable SNMP trap mode operation.
Indicates the SNMP trap supported version. Possible versions are:
SNMP v1: Set SNMP trap supported version 1.
SNMP v2c: Set SNMP trap supported version 2c.
SNMP v3: Set SNMP trap supported version 3.
Indicates the community access string when send SNMP trap packet. The
User's Manual of SGSW-24040 / 24240 Series
Figure 4-3-3
74
appears.