Planet SGSW-24040 User Manual page 208

The page includes the following fields:
Object

Ingress Port
 Switch

Frame Type

Action

Rate Limiter
 Port Copy
Figure 4-10-3 ACE Configuration page screenshot
Description
Select the ingress port for which this ACE applies.
Any: The ACE applies to any port.
Port n: The ACE applies to this port number, where n is the number of the switch port.
Policy n: The ACE applies to this policy number, where n can range from 1 through 8.
Select the Switch for this ACE applies.
Any: The ACE applies to any Switch.
Switch x: The ACE applie to one specific Switch that stack together.
Select the frame type for this ACE.
Any: Any frame can match this ACE.
Ethernet Type: Only Ethernet Type frames can match this ACE.
ARP: Only ARP frames can match this ACE.
IPv4: Only IPv4 frames can match this ACE.
Specify the action to take with a frame that hits this ACE.
Permit: The frame that hits this ACE is granted permission for the ACE operation.
Deny: The frame that hits this ACE is dropped.
Specify the rate limiter in number of base units. The allowed range is 1 to 15. Disabled
indicates that the rate limiter operation is disabled.
Frames that hit the ACE are copied to the port number specified here. The allowed
range is the same as the switch port number range. Disabled indicates that the port
copy operation is disabled.
User's Manual of SGSW-24040 / 24240 Series
187