Security Switch Snmp Trap Version; Security Switch Snmp Trap Community - Planet SGSW-24040 User Manual

Parameters:
enable : Enable SNMP traps
disable: Disable SNMP traps
(default: Show SNMP trap mode)
Default Setting:
disable
Example:
Enable SNMP trap mode.
SWITCH/>security switch snmp trap mode enable

Security Switch SNMP Trap Version

Description:
Set or show the SNMP trap protocol version.
Syntax:
Security Switch SNMP Trap Version [1|2c|3]
Parameters:
1 : SNMP version 1
2c: SNMP version 2c
3 : SNMP version 3
(default: Show SNMP trap version)
Default Setting:
1
Example:
Set SNMP trap version in version 2c.
SWITCH/>security switch snmp trap version 2c

Security Switch SNMP Trap Community

Description:
Set or show the community string for SNMP traps.
User's Manual of SGSW-24040 / 24240 Series
380