Print Options - 3D Printing Systems Up Plus User Manual

This is a handy feature to change colours of filament, insert objects into your print. This is a handy feature to change colours of filament, insert objects into your print. This is a handy feature to change colours of filament, insert objects into your print.
When paused you can "Withdraw" and "Extrude" filament. sed you can "Withdraw" and "Extrude" filament. Warning: By pausing keeps
the extruder and platform heater working, it is not suggested to pause for long periods of the extruder and platform heater working, it is not suggested to pause for long periods of the extruder and platform heater working, it is not suggested to pause for long periods of
time.
Status bar: The bottom status bar shows the current layer that is currently being pri The bottom status bar shows the current layer that is currently being pri The bottom status bar shows the current layer that is currently being printed
•
and the remaining time to complete the job. and the remaining time to complete the job.
Intilise Switch: By holding down the
•
print job, bring the platform down and then put the printer into sleep mode. the platform down and then put the printer into sleep mode. the platform down and then put the printer into sleep mode.

Print Options:

Speed: Fine, Normal or Fast. This simply determines the speed at which the printer moves. As a
general rule, the slower you print, the better the quality of the parts. For tall parts, running at Fast general rule, the slower you print, the better the quality of the parts. For tall parts, running at Fast general rule, the slower you print, the better the quality of the parts. For tall parts, running at Fast
speed can be problematic as the printer can vibrate to the extent that print speed can be problematic as the printer can vibrate to the extent that print quality is affected. For
large surface area parts, the Fine setting can be problematic as the printer takes longer to print the large surface area parts, the Fine setting can be problematic as the printer takes longer to print the large surface area parts, the Fine setting can be problematic as the printer takes longer to print the
part and the corners are therefore more likely to lift a little bit. part and the corners are therefore more likely to lift a little bit.
UnSolid Model: This function is useful for printing ST This function is useful for printing STL files that are not perfect. A perfect STL
file is a fully enclosed surface (water tight), with no holes in the surface skin, and no overlapping file is a fully enclosed surface
surfaces. If your file is not perfect, this option should allow you to print it anyway. If your file is not perfect, this option should allow you to print it anyway. If your file is not perfect, this option should allow you to print it anyway.
TIP: Once the print has started, you can unplug the
stored in the printer's internal memory, so the stored in the printer's internal memory, so the computer is no longer required.
UP Plus 3D Printer User Manual 3D Printer User Manual
By holding down the front switch on the printer, will
. This simply determines the speed at which the printer moves. As a . This simply determines the speed at which the printer moves. As a
, with no holes in the surface skin, and no overlapping
started, you can unplug the USB cable from the PC. The print job is
By pausing keeps
abort the current
quality is affected. For
iles that are not perfect. A perfect STL
. The print job is
v 2013.1.31 .1.31