Print Preferences - 3D Printing Systems Up Plus User Manual

3.3.6 Print Preferences

Preferences
Click menu "3D Print->Setup >Setup" or Click "print" and select "Preferences' and the fol
box opens:
Recommended Settings in red in red and in most cases are the only values that require changing d
pending on the model you are printing. pending on the model you are printing.
Windows version Windows version
Z Resolution:
Sets the print resolution (layer on (layer thickness) of the printer. This can be between 0.2
0.4mm per layer. The finer the layer thickness, the better quality, the stronger the printed part and
the longer it takes to print.
Fill:
There are four types of honeycomb honeycomb fill that the interior of parts are made of. These cut away i
ages below show the four different internal fill types. show the four different internal fill types.
UP Plus 3D Printer User Manual 3D Printer User Manual
and in most cases are the only values that require changing de-
of the printer. This can be between 0.2mm per layer to
the layer thickness, the better quality, the stronger the printed part and the layer thickness, the better quality, the stronger the printed part and
Solid Honeycomb: The part is made
plastic, which gives you the strongest part with a plastic, which gives you the strongest part
longer print time. This setting is recommend
strong and functional parts.
Semi-Solid Honeycomb
he following dialog
Mac version Mac version
These cut away im-
art is made of nearly solid
. This setting is recommended for
v 2013.1.31 .1.31